Skip to product information
Removable Tints
$100.00
Excellent
425 reviews
Are you sure you want to stop?
Your selections will be lost.
...
.........
Description
Our pre-cut, removable window tint film designed to fit your specific vehicle make and model straight out of the box. Unlike traditional window tints that are permanently bonded to your glass, Ontint Removable Window Tint attaches securely using adhesive strips, meaning it can be removed, stored, and reapplied whenever you need without any damage to your windows or leftover residue.
What's Included
Each Ontint kit comes with precision pre-cut film panels sized specifically for your vehicle, along with the adhesive strips needed for a clean, secure fit. No trimming, no guesswork. Just a straightforward installation you can complete yourself in under 5 minutes.
Customisable Shade Options
Ontint is available in a range of darkness levels so you can choose the look and level of privacy that suits you. Whether you prefer a subtle light tint or a darker finish, our tint is a much safer choice legally compared to many standard permanent tints, which are often applied too dark and can result in fines or failed vehicle inspections.
Removable
.
Reusable
.
Road-Legal
.
The practical choice for drivers who want tinting without the permanence.
Zero residue
Clip on & off
Road legal
How We Compare
⭐ Recommended
OnTint
Removable Film
Reusable
Standard
Adhesive Tint
Permanent · Stuck on
Removal
Clip on & off anytime
Stuck for life
Residue
Zero — no adhesive
Sticky residue on glass
Reusable
Any vehicle, anytime
Single use only
Road Legal
Remove instantly
Risk fines & MOT failure
Install
DIY — no fitter needed
Pro fitting required
UV Block
Up to 95% filtered
Varies by product
Heat
99% IRR filtered
Limited rejection
Glass Damage
None — no adhesive
Scratches on removal
Flexibility
Change shade anytime
Locked in permanently
OnTint uses a special detachable film — no adhesive, no residue, no mess.
Why OnTint
0 residue
Zero Residue
No adhesive — no mess
∞ uses
Fully Reusable
Any vehicle, anytime
0 UV
UV Protection
95% UV blocked
0 legal
Road Legal
Inspection safe shades
Before You Apply
How To Prepare Your Windows
Takes less than 5 minutes. Follow these steps for a perfect, bubble-free fit every time.
01
Step 01
Clean the glass thoroughly
Wipe the inside of your window with a lint-free cloth and glass cleaner. Remove all dust, grease and fingerprints — any residue will show under the film.
💡 Isopropyl alcohol works best
02
Step 02
Dry completely — no moisture
Make sure the glass is fully dry. Any trapped moisture causes cloudiness or bubbling. Give a final dry wipe and let it air for 60 seconds.
⏱ Wait 60 seconds after wiping
03
Step 03
Lower the window slightly
Roll the window down 2–3 cm. This gives room to slot the top edge of the film behind the seal cleanly for a flush finish.
📏 2–3 cm gap is enough
04
Step 04
Match the panel to the window
Each film is shaped for a specific window. Check the labels — front left, front right, rear left, rear right. Wrong panel means gaps at the edges.
🔍 Check label before fitting
05
Step 05
Align from the top edge first
Slide the top edge behind the seal, then press the film flat from top to bottom. Smooth out any air pockets with your palm as you go.
👋 One smooth downward motion
06
Step 06
Roll the window back up
Slowly close the window. The seal locks the top edge in place securely. Your tint is fitted, road-legal, and ready to go.
🚗 Done — enjoy your tint
Entire car done in minutes
No tools. No professional needed. Remove and refit anytime.
~5 min
Common Questions
Frequently Asked Questions
Everything you need to know about OnTint removable window tints.
Absolutely not. OnTint uses no adhesive on the glass itself. The film clips and attaches without bonding to your window, so when you remove it there is zero residue, no marks, and no damage to the glass whatsoever.
Yes. OnTint shade options are calibrated within legal limits so you can drive with confidence. And because the film removes instantly, you can take it off for any inspection or MOT and refit it straight after — no permanent commitment required.
Each OnTint kit is cut to fit a specific vehicle's windows, so panels from one car won't fit a different model. If you change vehicles, simply order a new kit for your new car. The good news — you can refit the same panels on your current vehicle as many times as you like.
OnTint panels are held in place by secure attachment strips and clips that grip the window seal and frame — not the glass. This gives a firm, rattle-free fit that stays in place while driving, without touching or bonding to the glass surface at all.
Most customers fit their full car in under 5 minutes. No tools, no professional, no mess. Each panel is shaped to your window so there's no cutting or guesswork — just clip it on and you're done. Removal is just as fast.
Yes — despite being removable, performance is not compromised. OnTint blocks up to 95% of UV radiation and filters 99% of infrared radiation (IRR), significantly reducing the heat buildup inside your cabin and protecting your interior from fading and cracking over time.
Yes — as many times as you like. Simply remove the panels, store them flat, and refit whenever you need. There's no one-time-use limitation. The film and attachment strips are designed for repeated fitting and removal without degrading.
OnTint is available in a range of darkness levels — from a subtle light tint to a darker privacy finish. All options are calibrated to stay within road legal limits. You can select your preferred shade when customising your order.
No fitter needed. OnTint is designed for self-installation. Each panel comes ready to fit with full instructions included. No tools, no heat gun, no experience required. If you can open a car door, you can fit OnTint.